BenchMark Shark Slickline Measurement Device with Combined Depth/Tension Manual Rev H

BenchMark Shark Slickline Measurement Device manual covering combined depth/tension measurement, operation, specifications, maintenance and parts.


BenchMark Shark Slickline Measurement Device with Combined Depth/Tension Manual Rev H - cover page
Brand
Benchmark
Category
Other
Document type
User Manual
Language
English
Pages
34
File format
PDF
File size
1.4 MB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
2B306975EF2C659698BB42313D5FD628

About this manual

The BenchMark Shark is a heavy-duty two-wheeled slickline measurement device that measures both wireline depth and tension. It uses a non-reverse-bend wire path to reduce wire abrasion and fatigue, and is designed to be mounted in front of the wireline drum on a spooling mechanism. An optional turn table allows the head to be pivoted 90 degrees for shipping protection.

The manual covers the general description, technical specifications, wire path, depth and tension measurement, system operation, maintenance and repair, spare parts, drawings and optional accessories. Depth can be measured with a mechanical counter, an optical encoder and a magnetic pickup; tension is measured by a load pin that also serves as the tension wheel axle. The document is Rev H, dated Aug 2009.

What's inside

  • General
  • Technical Description and Specifications
  • Wire Path
  • Depth Measurement
  • Tension Specifications
  • General Specifications
  • System Operation
  • Maintenance and Repair
  • Drawings and Parts Lists
  • Optional Accessories

Specifications

Height29.5 in (0.75 m)
Length37 in (0.94 m)
Width11.5 in (0.292 m)
Weight94 lbs (42.6 kg)
Maximum Tension4500 lbs (2040 kg)
Line Sizes.092 in – 3/16 in (2.3 mm – 4.76 mm)
Encoder1200 PPR (or customer specification)
Backup Counter4 PPR quadrature
Tension Accuracy1% full scale nominal
Measure Wheel Groove Circumference4 ft with .125 wire installed
Measure Wheel HardnessGreater than Rockwell 58

Frequently asked questions

What does the BenchMark Shark measure?

It measures wireline depth and tension; the manual describes it as a heavy-duty two-wheeled device.

What line sizes can the Shark handle?

The stated line size range is .092 in to 3/16 in (2.3 mm to 4.76 mm).

How is tension measured?

Tension is measured by a load pin that also serves as the axle for the tension wheel.

How many independent depth measurements does the measuring head provide?

It can provide three independent depth measurements: a mechanical counter, an optical encoder, and a magnetic pickup.

Download PDF (1.4 MB)

More Benchmark Manuals


View all Benchmark manuals →