User manual for the Baumatic Q1000SS 100cm stainless steel cooker hood, covering operation, cleaning, filter maintenance, installation and troubleshooting.
The Baumatic Q1000SS is a 100cm stainless steel cooker hood with touch controls, a booster, three metallic grease filters, and two halogen lights. Its stated extraction capacity is 750 m³/hr, and the manual lists height, width and depth dimensions.
The user manual covers safety information, installation and electrical connection, extraction or recirculation mode, control and timer use, cleaning, maintenance, carbon filter fitting, and troubleshooting. It also includes environmental notes, Baumatic Ltd. conditions of guarantee, and contact details.
| Height | 850 mm – 1100 mm |
|---|---|
| Width | 1000 mm |
| Depth | 490 mm |
| Chimney section dimensions | 165 mm x 220 mm |
| Extraction capacity | 750 m³/hr |
| Noise level | 49–60 dB |
| Speeds | 5 speeds and booster |
| Grease filters | 3 metallic grease filters |
| Lights | 2 halogen lights |
| Controls | Touch control operation |
The manual says not to set the hood less than 700 mm above the cooker; it lists 700 mm for electric and gas cookers and 800 mm for coal or oil cookers.
Press button 3 to activate the timer; the cooker hood’s motor and lights then switch off automatically after fifteen minutes.
With the hood off, hold buttons 2 and 3 for more than four seconds until the number “8” is displayed.
Check that the hood is connected to the electricity supply and that the fan speed control is set correctly.