Instruction manual for installing, connecting, and operating the Baader SteelDrive motor drive for the Baader Steeltrack focuser.
The Baader SteelDrive is a motor drive for the Baader Steeltrack focuser. This manual covers installing the drive and belt, aligning and tensioning the belt, connecting to a dedicated hand controller, LVI SmartGuider 2, or PC, and operating the hand controller.
It also describes setup options such as focuser model selection, custom position calibration, trip maximum, backlight, temperature compensation and coefficient, saving settings, and the zeroing function that retracts the drawtube to the absolute zero position.
| Current absorption | up to 900 mA |
|---|---|
| Temperature coefficient range | 0.01–0.50 °C/mm (step 0.01) |
| Custom position calibration travel | 25 mm |
| Trip maximum adjustment step | 5 mm |
The package includes the SteelDrive unit with aluminium pulley, a transmission belt, a CDROM with drivers, software and instruction manuals, a USB cable, and a thermo probe.
The SteelDrive can absorb up to 900 mA of current.
The drawtube must be completely retracted to the zero position before pressing YES.
A wrong trip is loaded and the focuser will not move to the correct positions.