This manual provides operating, maintenance, and safety instructions for the Avdel 74200 hydro-pneumatic threaded insert power tool.
The document serves as an instruction manual for the Avdel 74200 Threaded Insert Power Tool. It covers essential topics including safety rules, tool specifications, intended use, dimensions, and detailed procedures for putting the tool into service, adjusting strokes, and operating it correctly.
Additionally, the guide provides comprehensive instructions for fitting and servicing nose assemblies, performing daily and weekly maintenance tasks such as checking the pneumatic cylinder and rod guide, and troubleshooting common faults. It also includes information on the limited warranty and safety data regarding priming oil.
| Air Pressure (Minimum - Maximum) | 5-7 bar (75-100 lbf/in2) |
|---|---|
| Free Air Volume Required @ 5 bar/75 lbf/in2 | 8 litres (.28 ft3) |
| Stroke (Maximum) | 7 mm (.276 in) |
| Motor Speed (Spin On / Spin Off) | 2000 rpm |
| Pull Force @ 5 bar/75 lbf/in2 | 19.1 kN (4300 lbf) |
| Cycle time | Approximately 2.5 seconds |
| Noise Level | Less than 75 dB(A) |
| Weight (Without nose equipment) | 2.2 kg (4.85 lb) |
All tools are operated with compressed air at an optimum pressure of 5.5 bar.
The wearing of safety glasses is required both by the operator and others in the vicinity to protect against pin ejection.
Nose assemblies should be serviced at weekly intervals.