Auvidea J90 Carrier Board Technical Reference Manual

Auvidea J90 carrier board technical reference manual for NVIDIA Jetson TX1 and TX2, covering features, power, connectors, IMU, and MCU commands.


Auvidea J90 Carrier Board Technical Reference Manual - cover page
Brand
Auvidea
Category
Other Electronics
Document type
User Manual
Language
English
Pages
22
File format
PDF
File size
2.1 MB
Published
09 November, 2026
Updated
09 November, 2026
MD5 checksum
19C0D63DA120BCD9B71E66AE45DDF49E

About this manual

The Auvidea J90 is a carrier board for one NVIDIA Jetson TX1 or TX2 compute module. Two versions are available: the J90-LC with a subset of features, and the fully populated J90. The board measures 50 x 87 mm and accepts 12V power input in a 7V to 17V range.

The manual covers getting started, applying power, auto start, console access, and firmware upgrade. It also details I2C and SPI buses, the MPU-9250 IMU, connectors, revision history, and the MCU command set for watchdog and power control.

What's inside

  • Features
  • Getting started
  • Applying power
  • Console access
  • IMU (MPU-9250)
  • J90: I2C busses of the Jetson TX1
  • Connectors
  • MCU command set

Specifications

Compatible modulesNVIDIA Jetson TX1 or TX2 compute module
Size50 x 87 mm
Height16 mm (incl. TX1 without heatsink)
Power input12V, range 7V to 17V
Model number38255-X
IMU9 axis sensor MPU-9250

Frequently asked questions

What voltage powers the J90 board?

The J90 uses a regulated 12V power supply with an input range of 7V to 17V.

Does the J90 automatically power on the Jetson module?

The J90 automatically powers up the TX1 or TX2 about one second after power is applied; the J90-LC must be powered on manually.

What is the standard console baud rate?

The standard baud rate is 115200 with settings 8/1/N.

Which IMU is installed on the J90?

The J90 is equipped with a 9-axis MPU-9250 IMU connected via SPI0.

Download PDF (2.1 MB)