AUS 640T/750T gas cooktop operating instructions covering installation, gas and electrical connections, use, maintenance, and troubleshooting.
The AUS 640T/750T gas cooktop manual covers installation, positioning, electrical and gas connections, the data plate, burner and nozzle specifications, and the overall appliance view. It also includes start-up and use, practical burner advice, precautions, general safety, disposal, maintenance and care, cleaning, gas tap maintenance, and troubleshooting.
The document is provided in French, Spanish, and English. Installation must be carried out by an authorised person in accordance with local gas and electrical requirements and the cited standards.
| Minimum clearance from burner edge to side wall | 200 mm |
|---|---|
| Minimum clearance from burner edge to rear wall | 55 mm |
| Minimum range hood clearance above hob burners | 600 mm |
| Minimum overhead exhaust fan clearance above hob burners | 750 mm |
| Minimum wall cabinet height above hob surface | 700 mm |
| Minimum adjacent cabinet distance from hob edge | 600 mm |
| Fastening hook worktop thickness range | 20 to 40 mm |
| Maximum flexible gas hose length | 1.2 metres |
| Natural gas pipe inner diameter | 13 mm |
| LPG pipe inner diameter | 8 mm |
| Minimum free ventilation opening vertical dimension | 6 mm |
| Supply cable circuit-breaker minimum contact opening | 3 mm |
| Factory gas setting | Natural Gas |
The cooktop must be installed by an authorised person in accordance with local gas and electrical authority requirements and the applicable published standards.
It is supplied set for Natural Gas, and the manual provides directions for converting it to LPG or back to Natural Gas.
A flexible hose should be as short as possible, with a maximum length of 1.2 metres, and must be approved to class B or D of AS/NZS 1869 as a minimum.
After installation, check the gas circuit, internal connections, and taps for leaks using a soapy solution, never a flame.