This user manual provides instructions for the AUKEY SK-M30 Eclipse Wireless Speaker, covering setup, pairing, audio playback, and specifications.
This document is the user manual for the AUKEY SK-M30 Eclipse Wireless Speaker. It details the package contents, including the speaker, Micro-USB cable, 3.5mm audio cable, and warranty card. The guide explains how to power the device on and off using the power button and how to pair it with Bluetooth devices by selecting 'AUKEY SK-M30' and entering the PIN '0000'.
| Bluetooth Version | BT 4.2 |
|---|---|
| Audio Output | 2 × 10W |
| Frequency Response | 40Hz-20KHz |
| Signal-to-Noise Ratio | ≥86dB |
| Microphone Sensitivity | 35 ±3dB |
| Input Voltage | DC 5V |
| Charging Time | 4 hours |
| Play Time | 12 hours (at 50% volume) |
| Talk Time | 10 hours |
| Battery Type | Li-ion (2 x 2000mAh) |
| Operating Range | Up to 10m / 33ft |
| Operating Temperature | 14°F- 122°F / -10°C- 50°C |
| Dimensions | 211 × 114 × 64mm |
| Weight | 800g / 28.2oz |
If a code or pin is required for pairing, enter '0000'.
Use a straightened paper clip or a toothpick to carefully short-press the reset button located towards the top at the back, furthest inside the 3.5mm Aux in jack.
The speaker will disconnect from your phone or other paired devices.