ArmorPoxy ArmorPower Epoxy Coating Kit Application Instructions

Application instructions for the ArmorPoxy ArmorPower Epoxy Coating Kit, covering surface prep, mixing, application, clear coat, cleanup, and maintenance.


ArmorPoxy ArmorPower Epoxy Coating Kit Application Instructions - cover page
Brand
ArmorPoxy
Category
Chemical products
Document type
Installation Guide
Language
English
Pages
12
File format
PDF
File size
1.3 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
5B60A15345B6E59398CB84C404FC0A43

About this manual

The ArmorPower Epoxy Coating Kit from ArmorPoxy is supplied with application instructions for floor coating work. The document lists kit contents and an installation chart, then explains required conditions, surface preparation, and application steps.

It covers removing foreign substances, pressure washing and etching, alternate floor grinding, taping the perimeter, floor repairs, mixing A and B epoxy, solid-color or decorative fleck application, clear coat, cleanup, return to service, maintenance, and a FAQ.

What's inside

  • Application Notes
  • Epoxy Kit Contents
  • Before You Start
  • Remove Foreign Substances
  • Pressure Wash and Etch
  • Alternate Prep (Floor Grinding)
  • Mixing A & B Epoxy
  • Product Application
  • Clear Coat Application
  • Maintenance

Specifications

Relative humidity80% or less
Minimum material temperature for installationAbove 60 °F
Maximum moisture level3.5 lbs/1000 sq ft/24 hours
ThinningUp to 1/2 cup (4 oz) xylene per gallon of mixed materials
Suitable substrateBare concrete only

Frequently asked questions

What temperature range is recommended for application?

ArmorPower Epoxy Coating Kits should be applied between 50-90 °F and when relative humidity is 80% or less.

Can the epoxy be thinned?

Yes. ArmorPoxy may be thinned by adding up to 1/2 cup (4 oz) of xylene (xylol) per gallon of mixed materials.

What should be done if the floor has excessive moisture?

Moisture levels over 3.5 lbs/1000 sq ft/24 hours are excessive and may need additional moisture treatment; contact ArmorPoxy for assistance.

What type of surface is ArmorPower Epoxy intended for?

It is intended to be applied to bare concrete only.

Download PDF (1.3 MB)