Product leaflet for the AquaHeat Arctic DP-120VK heat unit: indirect domestic hot water heating, pressure difference control and technical data.
The AquaHeat Arctic DP-120VK is a heat unit that indirectly heats domestic hot water through a heat exchanger and reduces the primary pressure difference of a central heat distribution network. It is intended for houses or apartments connected to such a network and is suitable for a primary supply temperature above 65 °C.
The leaflet lists the unit's features — priority switching to domestic hot water, electronic control, no moving parts in the tap water circuit, a double-walled heat exchanger with KIWA approval, integrated heating control, an adjustable keep-warm function, a 230 V 50 Hz supply and an EPP insulation box — and gives a general description of heating, hot water and keep-warm operation, followed by technical data, dimensions, connections and water quality requirements. This manual is written in Dutch.
| Dimensions (W x D x H, excl. bracket) | 580 mm x 200 mm x 400 mm |
|---|---|
| Weight | 13 to 15 kg |
| Electrical supply | 230 V, 50 Hz (N-L-PE) |
| Pressure class | 1000 kPa |
| Primary pressure difference range | 50 kPa - 250 kPa |
| Primary supply water temperature (heating) | 65 - 95 °C |
| Domestic hot water capacity | approx. 6 / 7.5 / 9 / 12.5 liters per minute (CW class 3/4/5/6a) |
| Secondary pressure difference setting | adjustable between 5 - 30 kPa (10 kPa ex factory) |
| Heat connections | primary and secondary ¾" female thread |
| pH value of water | 7 - 9 |
| Conductivity | 10…500 µS/cm |
It indirectly heats domestic hot water and reduces the primary pressure difference of the heat distribution network.
It is suitable for a primary supply temperature above 65 °C, with a stated heating supply range of 65 - 95 °C.
From a hot water draw of more than 1.5 liters per minute, the Vortex flow sensor sends a signal to the controller.
When there is no hot water demand, the heat exchanger is held at about 50 °C; this temperature is adjustable.