ANU user manual for the Tiptilt infrared secondary on the 2.3m telescope, covering startup, calibration, DO files, the Solaris interface and CASPIR commands.
The ANU manual describes the Tiptilt infrared secondary system on the 2.3m telescope. Its aim is to counteract star motion caused by translational seeing and guide errors by tilting the secondary mirror; the guide star is detected with the Tiptilt CCD using light shortward of 0.85 microns. The system can move the image by up to 10 arcseconds, and its X-Y stage can move up to +/- 2.5 arcminutes. In correct mode it reads a CCD subframe at up to 110 times per second.
The document covers starting up the system on the Sun workstation misty, initial and regular calibration, DO file examples, a quick guide, known bugs, and reference material for the Solaris interface, telescope control commands, and using Tiptilt with CASPIR. It was written by Mick Brooks, Jan van Harmelen and Peter Wood, Version 1-4, August 1998.
| Image correction range | up to 10 arcseconds |
|---|---|
| X-Y stage travel | up to +/- 2.5 arcminutes |
| Correct-mode readout rate | up to 110 times per second |
| CCD pixel size | 0.6 arcsec square |
| Visible CCD field | 38x38 arcsec |
| Acquire-mode CCD window | 64x64 pixels |
| Typical subframe size | 8x8 pixels |
| Guide-star wavelength | shortward of 0.85 microns |
It counteracts motion of the star caused by translational seeing and guide errors by adjusting the tilt of the secondary mirror.
The guide star is detected with the Tiptilt CCD using light shortward of 0.85 microns split from the CASPIR beam.
It reads the subframe at up to 110 times per second.
Type tiptilt & in a window on the Sun workstation misty.