AnalogicTech AAT3103 3-Channel Charge-Pump LED Driver Datasheet

AnalogicTech AAT3103 datasheet: a 3-channel charge-pump WLED driver for 1 to 3 LEDs at up to 30mA each, with 1x/2x auto switching and S2Cwire or PWM control.


AnalogicTech AAT3103 3-Channel Charge-Pump LED Driver Datasheet - cover page
Brand
ANALOGICTECH
Category
LED Driver Controller
Document type
Datasheet
Language
English
Pages
17
File format
PDF
File size
1 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
9067B6B29E72B3AF8609D8598CD5F6E4

About this manual

This datasheet describes the AAT3103, a constant-frequency charge-pump current-source white LED driver from AnalogicTech that can drive one to three LEDs at up to 30mA each. The charge pump switches automatically between 1x and 2x modes, and a low external parts count (one 1μF flying capacitor, 1μF capacitors at IN and OUT and one current-setting resistor) suits it to small battery-powered applications. The AAT3103-1/-2 use AnalogicTech's Simple Serial Control™ (S2Cwire™) interface to enable, disable and program LED current, while the AAT3103-4 uses a PWM signal of up to 50kHz with 10% to 100% duty cycle. A low-current shutdown mode reduces quiescent current to less than 1μA, and built-in soft-start, short-circuit and thermal protection are included. The device is offered in a 2x2.1mm Pb-free 10-lead SC70JW-10 package.

The document covers the general description, features, applications, typical application circuit, pin descriptions and pin configuration, absolute maximum ratings and thermal information, electrical characteristics, and typical performance characteristics such as efficiency, LED current matching, shutdown current and switching waveforms.

What's inside

  • General Description
  • Features
  • Applications
  • Typical Application
  • Pin Descriptions
  • Absolute Maximum Ratings
  • Electrical Characteristics
  • Typical Characteristics

Specifications

Input Voltage Range2.7V to 5.5V
LED Channels / Output CurrentUp to 3 LEDs at up to 30mA each
Switching Frequency900kHz
LED Output Current Accuracy±10%
LED Output Current Matching±3%
Shutdown CurrentLess than 1μA
Maximum Output Current (OUT)100mA
Package2x2.1mm Pb-free 10-lead SC70JW-10
Operating Junction Temperature Range-40 to 150 °C

Frequently asked questions

How many LEDs can the AAT3103 drive?

It can drive one to three white LEDs at up to 30mA each.

What is the input voltage range of the AAT3103?

The input power supply range is 2.7V to 5.5V.

How is the LED current set on the AAT3103-1/-2?

The S2Cwire interface is used to enable, disable and program the LED driving current, with 16 steps on the AAT3103-1 and 8 steps on the AAT3103-2.

What package is the AAT3103 available in?

It is available in a 2x2.1mm thermally enhanced Pb-free 10-lead SC70JW-10 package.

Download PDF (1 MB)

More ANALOGICTECH Manuals


View all ANALOGICTECH manuals →