Operation manual for the AN Angni TYJ-2A, JLQ-SI and XK-97A bacterial colony counter, covering setup, counting, probe maintenance and specifications.
The TYJ-2A, JLQ-SI and XK-97A bacterial colony counter from AN Angni is a digital semi-automatic bacterial inspection instrument made up of a counting pool, probe, counter and digital display. It uses CMOS integrated circuit technology, an LED digital display, a dedicated probe and energy-saving ring fluorescent side lighting in a dark deep-background counting pool.
The manual describes colony counting principles and methods, technical parameters, operating steps, probe maintenance, precautions, packing list and after-sales service. The counter is used for bacterial counts in food, beverages, pharmaceuticals, cosmetics, drinking water, sewage and clinical specimens. This manual is written in Chinese.
| Rated voltage | AC 220 V |
|---|---|
| Rated frequency | 50/60 Hz |
| Lamp power | 12/22 W |
| Display | LED, 0-999 |
| Counting signal | Buzzer |
| Petri dish diameter | Φ90 mm |
| Dimensions | 225×150×70 mm |
| Weight | 1.3 kg |
| Protection | IP20 |
Press the reset key (5); the display should show 000.
Press the calibration key (4) to test it; if it counts, the probe is damaged, and if it still does not count, the host instrument is faulty.
One year from purchase for problems caused by product quality, and the warranty card is required.
Clean the probe, especially its tip, but do not soak it in disinfectant or cleaning liquid.