Technical data, dismantling, cleaning, assembly, installation, parts list and warranty for the Amiad Arkal 4" Super Leader filter.
This document is a manual for the Amiad Arkal 4" Super Leader filter (catalog no. 015500-000058). It lists technical data such as pressure, flow rate, dimensions, weight, temperature and pH limits.
It also provides step-by-step dismantling for cleaning, assembly and installation instructions, a parts list with catalog numbers and materials, and the terms of the Amiad limited warranty.
| Inlet/Outlet diameter | 111 mm / 4" |
|---|---|
| Max. pressure | 10 bar / 145 psi |
| Max. flow rate | 100 m3/h / 440 gpm |
| Filtration area | 3704 cm2 / 574 in2 |
| Filtration volume | 3548 cm3 / 216 in3 |
| Filter length | 1190 mm / 47" |
| Filter width | 330 mm / 13" |
| Distance between connections | 445 mm / 17.5" |
| Weight | FL. 24 Kg / 52.8 lbs; GRV. 22 Kg / 48.4 lbs |
| Maximum temperature | 60 C / 140 F |
| pH | 2-13 |
| Optional length for old version grooved ends | 415 mm / 16.3" |
Turn off the water inlet and release pressure, drain through the drainage ball valve, open and remove the cover, remove the filter element, release the spine tightening nut, pull the cap's telescopic extension to decompress the discs, then rinse with a high-pressure water jet.
Close the spine tightening nut until the discs are tightly compressed, position the filter element back in place, place and secure the filter cover, secure the clamp and close it with the lever, then insert the safety pin.
It is recommended to install the filter horizontally, with a shut-off valve at the filter inlet and a small ball valve with a flexible hose in front of that valve for manual cleaning of the filter element.
The warranty is enforceable for 12 months after delivery, and Amiad's obligation is limited to repair or exchange of defective products under normal use and service.