ALPHA LITE DL100 Series LED Fixture User Manual

User manual for the ALPHA LITE DL100 LED fixture: specifications, AC power connection, lighting on/off and DMX address setting with dip switches.


ALPHA LITE DL100 Series LED Fixture User Manual - cover page
Brand
ALPHA LITE
Category
lighting
Document type
User Manual
Language
English
Pages
12
File format
PDF
File size
622 KB
Published
09 November, 2026
Updated
09 November, 2026
MD5 checksum
1EE7D651A539598DB50C699E07BC3388

About this manual

ALPHA LITE DL100 is a COB LED lighting fixture with an average CRI of 97 or higher, a 100W LED chip and 30, 40 or 65 degree beam angle options. It offers a horizontal 360° and vertical 27° adjustable angle, an all-in-one main drive controller, keeps the last DMX signal when the signal is lost, and has a selectable linear or curve dimming curve.

The user manual book covers precautions and safety information, the fixture exterior view, dimensions and technical specifications, then the connection diagram, the SMPS AC power connection, manual lighting on/off with the dip switches and DMX address setting. ALPHA LITE contact details in Seoul, Republic of Korea, are given on the last page.

What's inside

  • Precautions
  • Safety Information
  • Fixture Information
  • Fixture Exterior View
  • Dimensions
  • Technical Specifications
  • Connection Diagram
  • Power Connection
  • Lighting On/Off
  • Address Setting

Specifications

LED Chip Type100W
Estimated LED Lifetime50,000 hours
White Light3200 / 5600 K (FCT)
Color RenditionCRI 97 / TLCI 97
Dimming0~100 (16-bit)
Beam Angle30 / 40 / 65 °
Tilt27°
Signal Control3-Pin DMX In and Through, individual control dip switch
Supported ProtocolDMX512 (Optional)
Power Input VoltageAC 100-277V
Power Consumption85W
Ambient Temperature Operation-20~45 °C
Body Dimension (WHD)ø250 x 160 mm
Body Weight1.55 kg / 3.4 lbs
Protection ClassIP20

Frequently asked questions

How do I turn the DL100 light on without a DMX signal?

Set dip switch #1 and #10 down and the light turns on. Raising dip switch #1 while the light is on turns it off.

What should the dip switches be when the DMX address is 000?

When the address is 000, the dip switch must be all up.

How do I solve DMX communication noise?

Select and turn on/off dip switch #1 or #2 of the terminating resistor. Only the last controller on the line should have the terminating resistor set, with other controller dip switches off.

What input voltage does the DL100 accept?

The power input voltage is AC 100-277V, and the SMPS is connected with a 100~220V free volt AC input cord.

Download PDF (622 KB)

More ALPHA LITE Manuals


View all ALPHA LITE manuals →