AIRCAT 805-HT 3/8 in. high-torque air ratchet manual with specifications, safety warnings, air supply hookup, exploded view and parts list.
This document covers the AIRCAT 805-HT 3/8" High-Torque Ratchet, an air-powered ratchet rated at 130 ft-lb maximum torque at 90 psi. It lists the tool's specifications, including free speed, bolt capacity, square drive, weight, length, air consumption, recommended hose size and air inlet thread, followed by important warnings for ratchets and accessory hazards.
The manual also explains air supply requirements and hookup, states that the tools are warranted against defects in material and workmanship for 2 years from date of purchase, and encloses service center listings. An exploded view and parts list with reference numbers, part numbers and descriptions, plus a tune-up kit listing for model 805-HT, are included.
| Model No. | 805-HT |
|---|---|
| Free Speed | 180 RPM |
| Bolt Capacity | 5/8 in. |
| Square Drive | 3/8 in. |
| Max. Torque | 130 ft-lb @ 90 psi |
| Weight | 3.3 lbs |
| Length | 12.45 in. |
| Air Consumption | 6 CFM |
| Recommended Hose Size | 3/8 in. |
| Air Inlet | 1/4 NPT |
| Recommended Air Pressure | 90 PSI at the tool while running free |
| Warranty Period | 2 years from date of purchase |
It is recommended that air pressure measure 90 PSI at the tool while running free.
They are warranted to be free from defects in material and workmanship for 2 years from the date of purchase.
Drain the air tank daily and clean the air inlet filter screen at least weekly, because water in the air line will damage the tool.
The minimum hose inside diameter should be 3/8 in., with fittings of the same inside dimensions.