Operation manual for the Airblast BTK-220 Bresle Test Kit, covering direct surface sampling, conductivity measurement, calibration, maintenance and…
This operation manual describes the Airblast BTK-220 Bresle Test Kit procedure for determining soluble contaminants on a surface using a direct sample method. It covers preparing the test area, applying the Bresle patch, injecting deionised water, dissolving salts, measuring conductivity, and calculating the surface density of soluble salts.
The manual also describes determining water-soluble salts in mineral abrasives and using the conductivity meter, including calibration, maintenance, and troubleshooting. It lists the meter controls and indicators and provides warranty information for the tester and electrode module.
| Soluble salt surface density | S mg/m² = 1 × (measured value − blank value) |
|---|---|
| Chloride multiplier | 0.6 |
| Conductivity units | µS or mS |
| Tester warranty | 1 year |
| Electrode module warranty | 6 months |
| Automatic shutoff | about 8 minutes |
Subtract the blank value from the measured value and multiply by 1; the result is expressed in mg/m² as sodium chloride.
Use 0.6 instead of 1.
The waterproof tester is warranted for 1 year.
Calibration is necessary every six months when the instrument is maintained as described.