Aipu FK1-XXXXXE3 series 1 W DC/DC module power supply datasheet with input/output specs, pinout, package and application circuits.
This document is the datasheet for the Aipu FK1-XXXXXE3 series DC/DC module power supply, a 1 W converter with wide 2:1 input voltage ranges and single or dual outputs. It lists typical features, application fields, model selection, input and output characteristics, general characteristics, package dimensions, pin definitions, ripple and noise test notes, and design reference circuits.
The series includes single-output (S) and dual-output (D) variants with input ranges of 4.5-9, 9-18, 18-36 and 36-75 VDC. Key stated ratings include up to 82% efficiency, 3000 VDC isolation, -40 to +85 C operating temperature, 250 kHz typical switching frequency, and a 22 x 9.5 x 12 mm package. This manual is written in Chinese.
| Output power | 1 W |
|---|---|
| Efficiency | Up to 82% |
| Isolation voltage | 3000 VDC |
| Operating temperature | -40 to +85 C |
| Storage temperature | -55 to +125 C |
| Switching frequency | 250 kHz typical |
| Weight | 4.37 g typical |
| Package size | 22 x 9.5 x 12 mm |
| Ripple and noise | 100 mVp-p max (20 MHz bandwidth) |
The output minimum load should not be less than 10% of the rated load; if lower power is needed, connect a resistor equivalent to 10% of the rated load in parallel.
The product cannot be used in parallel and does not support hot plugging.
The isolation voltage between input and output is 3000 VDC.
When floating or high impedance, the module outputs normally; a high level relative to input ground shuts it down.