Ailuoda 64-1 is a vinyl-modified cresol resin solution for bonding friction materials in brake pads and clutches.
Ailuoda 64-1 is a vinyl-modified cresol resin solution designed as an inner friction adhesive for bonding most materials. It can be used as a base coat adhesive for brake pads and clutches. The product offers good bonding performance and durability. It is applied by brushing, spraying, or rolling and cured by solvent evaporation followed by heat treatment. Pre-treatment of surfaces is required for optimal bond strength.
The adhesive is available in light brown liquid form with a viscosity of 1.5–3.0 Pa·s at 25°C, 39–44% solids content, and is diluted with ethanol/ toluene. It has a density of 1.00 and flash point below 18°C. Curing can be done at 150–230°C with specific time schedules. Storage is recommended at 6–28°C for up to 18 months. This manual is written in Chinese.
It can be applied by brushing, spraying, or rolling. When used as a base coat, it should be applied to the inner surface.
It first evaporates solvent at 20–70°C, then cures by heating to 150–230°C. Solvent drying requires ventilation and at least 6 hours at 20°C or 25 minutes at 70°C.
It can be stored for up to 18 months in unopened containers at 6–28°C. Higher temperatures reduce shelf life.