Affinibody Stain-Free PAGE Gel One-Step Preparation Kit (SF06/08/10/12/15) User Manual

Affinibody SF06/08/10/12/15 stain-free PAGE gel one-step preparation kit: how to mix lower and upper gels, run electrophoresis and image gels without staining.


Affinibody Stain-Free PAGE Gel One-Step Preparation Kit (SF06/08/10/12/15) User Manual - cover page
Brand
Affinibody
Category
Chemical products
Document type
User Manual
Language
Chinese
Pages
4
File format
PDF
File size
1.5 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
5F783E911B03452D8E2B35BEAF95771B

About this manual

This is the instruction manual for the Affinibody (亲和生命) Stain-Free PAGE Gel One-Step Preparation Kit, catalog numbers SF06/08/10/12/15. The kit contains upper gel solutions A and B, lower gel solutions A and B, and a modified polymerization accelerator (E-APS) supplied as a powder. The manual lists the components, their volumes and storage temperatures, and the number of gels each kit can cast at 0.75, 1.00 and 1.50 mm thickness.

The instructions cover preparing and mixing the lower gel, then the upper gel, with recommended E-APS amounts for different temperatures and gel thicknesses, and give notes on casting, comb insertion and gel setting in about 20 minutes. Separate sections describe electrophoresis conditions and stain-free gel imaging, including UV settings for imagers with and without a Stain Free function, plus a list of precautions. This manual is written in Chinese.

What's inside

  • 产品特点
  • 产品内容
  • 配制流程
  • 下层胶制备
  • 上层胶制备
  • 电泳条件
  • 免染凝胶成像
  • 注意事项

Specifications

Upper gel solution A (上A) volume80 mL
Lower gel solution A (下A) volume80 mL
Gel solution B volumes (upper and lower)2×125 mL each
Modified accelerator (E-APS) volume2×16 mL
Storage temperature4℃ / -20℃
Gels per kit, 0.75 mmmore than 125
Gels per kit, 1.00 mmmore than 100
Gels per kit, 1.50 mmmore than 75
E-APS reconstitution16 mL ddH2O
E-APS solution storage after dissolving3 months at 4℃, over one year at -20℃
Gel setting timeabout 20 min

Frequently asked questions

How long does the PAGE gel take to set?

About 20 minutes after the upper gel is poured and the comb is inserted.

Do I need to add TEMED?

No. The kit uses the modified accelerator E-APS instead of TEMED, which avoids the unpleasant smell.

Do I have to overlay the lower gel with water or alcohol?

No overlay is needed; the upper gel is poured immediately after the lower gel.

What electrophoresis conditions are recommended with the Uni SDS-PAGE rapid buffer?

Constant voltage of 300 V for 20 min.

How do I image the gel on an imager without a Stain Free function?

Manually set UV excitation at 302 nm or 365 nm for about 2 min, then select nucleic acid imaging (Ethidium Bromide mode) with an exposure of about 10 s.

Download PDF (1.5 MB)