Service manual for Aero-Motive 1100M, 1200M, 1300M, 1400M and 1500M series cable reels covering safety, mounting, wiring, setup turns and service.
This service manual covers Aero-Motive 1100M, 1200M, 1300M, 1400M and 1500M series cable reels. It begins with safety instructions and installation guidance for mounting, secondary support, pivot/swivel bases, wiring supply connections, guide rails, roller guides and sheaves.
It then explains cable winding, ratchet operation, spring tension and setup turns, followed by service procedures for installing or replacing working cable and replacing the collector ring assembly.
| Main shaft pipe thread | 1” x 11 1/2” N.P.S.C. |
|---|---|
| Minimum sheave bend radius | About 7.5 x cable diameter |
| Minimum setup turns per spring | 2 |
| Secondary support chain drop | No more than 6 to 12 inches |
Apply a minimum of 2 setup turns per spring before installing the free end of the working cable.
A four roller cable guide, the 2FMYE or 3FMYE, must be used with pivot or swivel mounts.
Lock out all electrical power and remove all spring tension before opening any enclosure or servicing the reel.
It should be as short as possible and allow the reel to drop no more than 6 to 12 inches if the primary connection is released.