Installation and usage guide for Acrel DTSF1352 and DTSD1352 three‑phase electronic electricity meters.
This manual provides an overview of the DTSF1352 and DTSD1352 three‑phase electronic electricity meters, describing their main functions, technical parameters, and physical dimensions. It explains how to wire and install the meters in three‑phase four‑wire or three‑wire configurations.
The guide also details operation and display functions, key programming options, LED alarm indicators, and communication settings (RS‑485, Modbus, DL/T645). It includes tables of register addresses for data reading and configuration, as well as environmental specifications and contact information for support. This manual is written in Chinese.
| Rated Voltage | 3 × 220/380V, 3 × 380V |
|---|---|
| Frequency | 50 Hz |
| Power Consumption (per phase) | < 2 VA |
| Power Consumption (max current) | < 1 VA |
| Input Current Options | 1.5(6) A, 5(20) A, 10(40) A, 20(80) A |
| Measurement Accuracy | Class 1.0 (DTSF1352), Class 0.5S (DTSD1352) |
| Clock Accuracy | ≤ 0.5 s/day |
| Pulse Width | 80 ± 20 ms |
| Pulse Constant | 6400 / 1600 / 800 / 400 imp/kWh |
| Communication Interface | RS‑485 (A+, B‑) |
| Supported Protocols | Modbus‑RTU, DL/T645‑07, DL/T645‑97 |
| Dimensions (L×W×H) | 126 mm × 91 mm × 74 mm |
| Maximum Wiring Capacity | Flexible cable 16 mm² |
| Operating Temperature | -20 °C ~ 55 °C |
| Storage Temperature | -30 °C ~ 70 °C |
| Relative Humidity | ≤ 95 % (no condensation) |
Use the BUS communication settings; the address can be set between 1 and 247.
The LEDs indicate Alarm, Phase sequence, and Loss voltage conditions.
No, the DTSF1352 only has an active pulse output; it does not provide a reactive pulse.