This manual introduces the hardware installation method of EC3-1698 3.5 inch industrial computer motherboard, mainly including product overview, features, specifications, accessories list and interface introduction
This guide describes the EC3-1698 3.5" industrial computer motherboard, based on an Intel Celeron‑M CPU, and outlines its features, specifications, and intended applications. It includes a full hardware installation procedure, connector pin‑outs, jumper settings, and BIOS configuration instructions.
Key sections cover the accessory checklist, detailed connector and jumper descriptions, BIOS setup, system resource tables, and appendices such as watchdog timer usage. The document is intended for system integrators and technicians installing the board in embedded industrial systems. This manual is written in Chinese.
| Processor | Intel Celeron‑M CPU, 800 MHz, 32 KB L1 cache |
|---|---|
| Chipset | Intel 852GM + 82801DB (ICH4) |
| BIOS | Phoenix BIOS |
| Memory | 1 DDR SODIMM slot (on‑board) |
| Display Interfaces | VGA (3D AGP 1920×1440, 32 MB shared), LVDS (max 1280×1024) |
| LAN | RealTek RTL8100C 10/100 Mbps Ethernet |
| IDE Interface | 44‑pin/2.0 mm standard laptop hard‑drive connector |
| Serial Ports | 2 ports – COM1 RS232, COM2 RS485 full‑duplex |
| Power Supply | +12 V and +5 V rails |
| Dimensions | 146 mm × 102 mm (3.5" standard) |
| Operating Temperature | 0 °C to +60 °C |
| Relative Humidity | 5 % to 95 % non‑condensing |
The board provides a single on‑board DDR SODIMM slot.
It includes a RealTek RTL8100C 10/100 Mbps Ethernet port.
The board requires +12 V and +5 V power rails.
The motherboard measures 146 mm by 102 mm and fits the 3.5" standard form factor.