VMware ESX 4.0 / ESXi 4.0 / vCenter Server 4.0 iSCSI SAN Configuration Guide

This guide describes how to configure an iSCSI storage area network (SAN) on VMware ESX/ESXi 4.0. It covers how to configure iSCSI initiators and storage, and how to modify SAN storage systems for ESX/ESXi.

Brand: VMware
Category: Other
Document type: Installation Guide
Language: Chinese
Pages: 88
File format: PDF
File size: 1.5 MB
Updated: 01 October, 2023
Models: ESX 4.0, ESXi 4.0, vCenter Server 4.0
MD5 checksum: A7A9C9307AF90E98B2FEF1A1C75934C5
PDF: VMware ESX 4.0 / ESXi 4.0 / vCenter Server 4.0 iSCSI SAN Configuration Guide PDF

About this manual

The document provides a comprehensive overview of using iSCSI SANs with VMware ESX/ESXi 4.0 and vCenter Server 4.0. It covers basic virtualization concepts, iSCSI SAN fundamentals, and the requirements and limitations for integrating these products.

It then details step‑by‑step procedures for configuring hardware and software iSCSI initiators, setting up LUN allocation, network authentication, CHAP parameters, multipathing, and troubleshooting. Additional sections address testing, performance tuning, and best‑practice recommendations for production environments. This manual is written in Chinese.

What's inside

iSCSI SAN Concepts
Configuring iSCSI Initiators
LUN Allocation and Management
Multipathing and Failover
Network Configuration and Authentication
Testing and Troubleshooting

Frequently asked questions

What types of iSCSI initiators does ESX/ESXi support?

ESX/ESXi supports both hardware iSCSI initiators using dedicated HBA cards and software iSCSI initiators embedded in the VMkernel.

How are CHAP parameters configured for an iSCSI initiator?

CHAP parameters are set in the iSCSI initiator configuration section as described in the guide.

Download PDF (1.5 MB)