This manual introduces the installation and configuration methods of Tsunami QuickBridge devices
The manual guides users through unpacking the QB units, assembling hardware, grounding, and connecting cables. It explains the recommended wiring topology, cable lengths, and spacing requirements for reliable wireless bridge operation.
It also covers installing the QB Manager software, system requirements, configuring IP addresses, setting node roles, adjusting throughput, frequency plans, and upgrading firmware. Status indicators and security settings are described for ongoing management. This manual is written in Chinese.
| Default master IP address | 192.168.20.56/24 |
|---|---|
| Default slave IP address | 192.168.20.51 |
| Standard cable length | 50 m (extendable to 75 m) |
| Minimum distance between devices | greater than 5 m |
| Software system requirements | 50 MB disk, 64 MB RAM, 400 MHz CPU, 10/100 Base‑T NIC |
| Throughput options | 18 M, 36 M, 54 M |
| Supported frequency plans | 3A3B3C, 4A4B4C4D |
The master unit uses 192.168.20.56/24 and the slave unit uses 192.168.20.51 by default.
Each package contains two QB units together with the necessary accessories for installation.
The software needs at least 50 MB of free disk space, 64 MB of RAM, a 400 MHz processor, and a 10/100 Base‑T network card.
Throughput can be set to 18 M, 36 M, or 54 M; both ends must have the same value, and changing the master side automatically updates the slave side.