The BD7-E Socket 478 System Motherboard User Manual 4200-0362-01 Rev. 1.00 provides information about the features and specifications of the motherboard, as well as detailed guides for hardware and BIOS settings.
This manual covers the complete setup of the ABIT BD7‑E motherboard, including hardware installation, CPU mounting, connector wiring, and system configuration. Detailed BIOS and power‑management settings are also described.
The document lists supported CPUs, memory types, expansion slots, and other technical specifications, helping users verify compatibility and correctly configure the system. This manual is written in Chinese.
| Supported CPU | Intel Pentium 4 socket 478 processor |
|---|---|
| System Bus Speed | 400 MHz (standard) / 533 MHz (overclock) |
| Chipset | Intel 82845SD (MCH) + Intel 82801BA (ICH2) |
| AGP Support | AGP 4X |
| USB Ports | USB 1.1 (multiple ports) |
| Memory Slots | 2 × 184‑pin DIMM (non‑ECC) supporting DDR 200/266 up to 2 GB, plus 1 × DDR 333 slot |
| Audio Codec | Integrated AC'97 |
| LAN Controller | 10/100 M PCI Ethernet |
| ATX Dimensions | 305 mm × 190 mm |
| Standby Power Requirement | At least 720 mA on the 5 V standby line |
It supports Intel Pentium 4 processors that use the Socket 478 package.
The board accepts two 184‑pin DDR 200/266 DIMM modules up to 2 GB total and one DDR 333 DIMM module.
The ATX board measures 305 mm by 190 mm.
The 5 V standby line must be able to supply at least 720 mA.