Dell SAS RAID Storage Manager User Guide introduces how to use the software to create, monitor and maintain storage configurations.
The Dell SAS RAID Storage Manager User Manual provides step‑by‑step instructions for installing the software on Windows or Linux, explains the graphical user interface, and describes how to create and manage storage configurations for Dell PERC and SAS RAID controllers.
It also covers monitoring of system events and storage devices, routine maintenance tasks such as firmware upgrades and consistency checks, and includes a troubleshooting section with error messages and a glossary of terms. This manual is written in Chinese.
| RAID 0 configuration support | Yes on PERC 5/i and PERC 6/i |
|---|---|
| RAID 1 configuration support | Yes on all controllers |
| RAID 5 configuration support | Yes on PERC 5/i and PERC 6/i, No on SAS 5/iR and SAS 6/iR |
| Hot spare disk support | Yes on SAS 5/iR, No on SAS 6/iR |
| Automatic configuration (Auto Config) | Yes on PERC 5/i and PERC 6/i, No on SAS 5/iR and SAS 6/iR |
Use the Windows installation procedure described in the manual under “在 Microsoft Windows 上安装 Dell SAS RAID Storage Manager”.
PERC 6/i supports RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50, RAID 60, hot spare disks, automatic and manual configuration, and event monitoring.
Yes, the manual explains how to monitor system events and storage devices in the “监测系统事件和存储设备” section.
Select the virtual disk and run the consistency check operation as described in the “运行一致性检查” section.