S3C44BOX development board deluxe board boot program user manual, introduces how to configure serial port, burn BIOS and burn image.rom etc.
This manual describes how to set up the S3C44BOX luxury development board, including serial port configuration, BIOS flashing, and boot procedures for uClinux. It also provides command reference and source compilation notes.
The document is organized into sections covering serial settings, flash programming methods, BIOS commands, TFTP usage, and supported flash types, helping developers quickly get the board operational. This manual is written in Chinese.
| Serial port baud rate | 57600 |
|---|---|
| SDRAM size | 16 MB |
| Flash type (default) | MN29LV160B |
| Default IP address | 192.168.111.8 |
Set the host serial port to 57600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.
Run the FlashPGM program; if the progress bar stalls, close the window, press the board’s reset button (K1), then start flashing again.
After flashing, the BIOS automatically probes the SDRAM size and NOR flash model and displays the information.