The manual describes the functions, technical parameters, wiring, setup and operation of the SDFP6000 fire equipment power monitoring system.
The SDFP6000 fire equipment power monitoring system provides real‑time monitoring of main and backup power for fire safety devices, detecting over‑voltage, under‑voltage, over‑current, short‑circuit and phase‑loss faults and issuing audible‑visual alarms.
The document covers the monitoring controller, single‑phase and three‑phase voltage/current sensors, the S‑BUS300 repeater, wiring diagrams, installation guidelines, configuration steps and troubleshooting procedures. This manual is written in Chinese.
| Main power input voltage | AC220V/50Hz |
|---|---|
| Backup battery capacity | 24V/14Ah (>8 h) |
| Maximum power consumption | 150 W (host 10 W, bus 140 W) |
| Display type | FSTN graphic LCD |
| Alarm record storage | ≥24 months, 100 000 records |
| S‑BUS downstream bus | 4‑channel S‑BUS |
| Maximum S‑BUS length (128 modules) | ≤300 m |
| Operating temperature range | 0 °C – 40 °C |
The monitoring host instantly shows the fault location, type and time, and triggers a sound‑light alarm.
The backup battery provides power for more than 8 hours.
Upstream communication uses RS485 or S‑BUS interfaces.
Up to 128 modules can be connected on a 300 m S‑BUS bus.