IBM Cloud Object Storage System 3.14.3 Time Synchronization Configuration Guide

This document describes the IBM Cloud Object Storage System V3.14.3 Time Synchronization Configuration Guide.


IBM Cloud Object Storage System 3.14.3 Time Synchronization Configuration Guide - cover page
Brand
IBM
Category
Storage
Document type
User Manual
Language
English
Pages
19
File format
PDF
File size
832 KB
Published
29 November, 2023
Updated
29 November, 2023
MD5 checksum
D66C02BE52A711A89A9770970596EBA3

About this manual

This guide explains how the IBM Cloud Object Storage System uses the Network Time Protocol (NTP) to keep the clocks of interconnected nodes synchronized, and defines the related terms delay, offset, jitter and drifting. It notes that NTP uses UDP port 123 and that system clocks are accurate to within 1 second across the various nodes.

The document then describes how to set the synchronization method on the System NTP Configuration page of the Manager Web Interface, choosing between Manager NTP Only, Manager and External NTP, and External NTP Only, and entering external NTP server host names or IP addresses. It also covers the cron command that checks NTP status every minute, the messages shown when clocks are not synchronized, and the stated NTP limitations.

What's inside

  • Describe the IBM Cloud Object Storage System NTP functions
  • Configure clock synchronization
  • Setting the synchronization method
  • Synchronize the system clocks by using NTP
  • Recognize unusual time synchronization behaviors
  • Review the NTP limitations
  • Notices
  • Trademarks

Specifications

NTP portUDP port 123
Clock accuracy across nodeswithin 1 second
Manager Allowed Clock Difference Policy11 seconds

Frequently asked questions

What port does NTP use?

NTP uses UDP port 123.

Which NTP behaviors can be selected on the System NTP Configuration page?

Manager NTP Only, Manager and External NTP, or External NTP Only.

What happens if the Manager clock cannot synchronize to an external clock?

It generates an error in the Event Console.

What is the Manager Allowed Clock Difference Policy?

It is 11 seconds.

Download PDF (832 KB)

More IBM Manuals


View all IBM manuals →