Dell PowerVault MD3600i and MD3620i Storage Arrays With Microsoft Windows Server Failover Clusters Hardware Installation and Troubleshooting Guide Notes and Cautions
This guide provides information for installing and managing a cluster solution using Dell PowerVault MD3600i and MD3620i storage systems. It is intended for experienced IT professionals who configure the cluster solution and for trained service technicians who perform upgrade and maintenance procedures.
The document covers cluster requirements, node and storage requirements, cabling for public and private networks and storage systems, and preparing systems for clustering. It also describes iSCSI NIC installation and configuration, the Microsoft iSCSI Software Initiator, storage management software, troubleshooting tools, failover cluster configuration, the cluster data form, and the iSCSI configuration worksheet.
| Cluster nodes | Minimum two identical PowerEdge systems |
|---|---|
| RAM per cluster node | At least 1 GB |
| iSCSI network interfaces | Two iSCSI NICs or NIC ports per node |
| Supported storage systems | One MD3600i or MD3620i RAID enclosure; up to seven MD1200 and/or MD1220 expansion enclosures |
| Maximum hard drives | 96 |
| Power and cooling modules | Two integrated hot-swappable power supply/cooling fan modules |
| Physical disks | At least two physical disks in the MD3600i or MD3620i RAID enclosure |
An iSCSI cluster supports a minimum of two-node clustering and a maximum of sixteen-node clustering.
Two iSCSI NICs or NIC ports are required per node, and they should be placed on separate PCI buses.
Each cluster node requires at least 1 GB RAM.
Dell PowerVault Modular Disk Storage Manager runs on the management station or any host attached to the array to centrally manage the RAID enclosures.