Dell™ S2240T Monitor User’s Guide Model: S2240Tb October 2015 Rev. A06
This guide covers the Dell S2240T monitor, including package contents, parts and controls, specifications, setup, cable organization, stand removal, wall mounting, and troubleshooting.
The monitor has a 54.6 cm (21.5-inch) viewable VA LCD panel with LED backlight, 1920 x 1080 maximum resolution, tilt capability, VESA 100 mm mounting holes, and touch-screen support through a USB connection.
| Viewable image diagonal | 54.6 cm (21.5 inches) |
|---|---|
| Panel type | VA |
| Maximum preset resolution | 1920 x 1080 at 60 Hz |
| Pixel pitch | 0.248 x 0.248 mm |
| Viewing angle | 178° vertical and horizontal typical |
| Luminance output (panel) | 280 cd/m² (typical) |
| Contrast ratio | 3000 to 1 (typical) |
| Dynamic contrast ratio | 8M to 1 (typical, Dynamic Contrast On) |
| Response time | 25 ms (typical); 12 ms (typical) with Overdrive |
| Color depth | 16.7 million colors |
| Color gamut | CIE1931 (72%) |
| Horizontal scan range | 30 kHz to 83 kHz |
| Vertical scan range | 56 Hz to 76 Hz |
| Backlight | LED edgelight system |
| Faceplate coating | Anti-Glare with 3H hardness |
| VESA mounting holes | 100 mm x 100 mm |
| Standby power | 0.5 W |
| High Dynamic Contrast Ratio | 8,000,000:1 |
Enter Control Panel, choose Tablet PC settings, select Calibration, recalibrate following the on-screen text, then save or discard the calibration data.
Check the Scaling Ratio setting in the Image Setting OSD and reset the monitor to Factory Settings.
Check the signal source, make sure the computer is not in power saving mode, check or replug the signal cable, and reset the computer or video player.
Set the display resolution to 1920 x 1080 pixels using Screen Resolution.