This document describes Dayton Superior's anchoring cements, epoxy grouts and bonding adhesives, epoxy sprays, and bonding agents.
This document is a guide specification prepared by Dayton Superior Corporation to assist design professionals in preparing specifications for anchoring cements, epoxy grouts, bonding adhesives, epoxy sprays, and bonding agents. It is designed to be used as a basis for project specifications or office master specifications, following the principles of the Construction Specifications Institute (CSI).
| Compressive Strength (3 hours) | 4100 psi (28.2 MPa) |
|---|---|
| Compressive Strength (28 days) | 6800 psi (46.9 MPa) |
| Bond Strength (7 days) | 2100 psi (14.5 MPa) |
| Tensile Strength (28 days) | 340 psi (2.3 MPa) |
| Compressive Strength (Epoxy Adhesive) | 10,600 psi (73 MPa) |
| Bond Strength (Epoxy Adhesive) | 3000 psi (20 MPa) |
| Modulus of Elasticity (Epoxy Adhesive) | 500,000 psi (3447 MPa) |
| Water Absorption (Epoxy Adhesive) | 0.9 percent |
| Compressive Strength (Epoxy Grout) | 12,500 psi (86.2 MPa) |
| Bond Strength (Epoxy Grout) | 2200 psi (15.2 MPa) |
| Compressive Strength (Bonding Agent) | 10,400 psi (71.7 MPa) |
| Bond Strength (Bonding Agent) | 3150 psi (21.7 MPa) |
Do not apply anchoring cements at temperatures below 40 degrees F (4 degrees C).
Do not apply epoxies at temperatures below 40 degrees F (4 degrees C).
The compressive strength of Ankertite Cement is 6800 psi (46.9 MPa) at 28 days.