The webertherm EIFS system is a multi-layer insulation system that is suitable for exterior cladding on both new and renovated buildings. The system uses EPS prefabricated boards for thermal insulation, which are then coated, meeting the need for facade renovation based on energy criteria.
The Weber webertherm EIFS is a multi-layer exterior insulation and finish system used for new construction and renovation. It consists of substrate, expanded polystyrene (EPS) boards, base coat, fiberglass reinforcement mesh, and acrylic finish coat, providing thermal insulation, energy savings, impact resistance, and a variety of finishes.
The manual details step-by-step installation: starting profile placement, EPS board adhesion and mechanical fixing, reinforcement profiles at openings, base coat application with mesh embedding, and final acrylic coating. It includes technical data such as material consumption rates, mesh specifications, fixing densities, and mixing ratios. This manual is written in Spanish.
| EPS board density | 20 kg/m³ |
|---|---|
| Fiberglass mesh aperture | 5x5 mm |
| Base coat coverage as leveling coat | 3 kg/m² (2-3 mm thickness) |
| Base coat coverage as adhesive | 10 kg/m² (notch trowel No. 6) |
| Minimum mechanical fixing density | 6 anchors per m² |
| Drip profile mesh specification | 6x6 mm aperture, 165 g/m² |
| Corner profile mesh specification | 4x4 mm aperture, 165 g/m² |
| Base coat mixing ratio | 1 part water to 4 parts base coat |
A minimum of 6 anchors per m² is required, increased for height, wind exposure, and building edges.
Mesh joints must overlap by at least 10 cm.
Mix 1 part water with 4 parts base coat powder.
The acrylic finish can be applied with a metal trowel for smooth textures, a medium-nap roller for rolled textures, or a hopper gun with a medium nozzle and 35 psi compressor for projected textures.