The DNx-AI-218/228-300 is an 8-channel, 24-bit, simultaneously sampling, differential analog input board series with per-channel isolation for the PowerDNA Cube and PowerDNR RACKtangle. The series features: 1. 8 differential analog input channels 2. 24-bit resolution 3. Simultaneous sampling 4. Per-channel isolation 5. Compatibility with the PowerDNA Cube and PowerDNR RACKtangle
The DNx-AI-218/228-300 User Manual describes 8-channel, 24-bit, simultaneously sampling differential analog input boards for the PowerDNA Cube and PowerDNR RACKtangle. It covers the DNx-AI-218 (±10 V) and DNx-AI-228-300 (±300 V) boards, which are similar except for their model numbers and voltage ranges.
The manual includes feature lists, technical specifications, device architecture, diagnostics, indicators, connector pinouts, and programming guidance using high-level and low-level APIs, plus an accessories appendix and index.
| Number of channels | 8 fully differential |
|---|---|
| ADC resolution / type | 24 bits / SAR (AD7766) |
| Sampling rate | 120 kS/s per channel (max); 480 kS/s max aggregate for entire board |
| Input bias current | < 2 nA typical |
| Input offset | <4 μV at G=1, <2 μV at G=2, <1 μV at G>2 (@ 25°C) |
| Input INL error | < 0.004 % (40 ppm) max |
| Input impedance | 10 MΩ ±1% |
| Input range (AI-218) | ±10 V (gain = 1) |
| Input range (AI-228-300) | ±300 V |
| Input resolution | 1.19 μV (gain = 1), 18.6 nV (gain = 64) |
| Gains | 1, 2, 4, 8, 16, 32, 64 |
| Common mode rejection | 110 dB typical |
| Channel-to-channel crosstalk | < 1 μVrms |
| Isolation | 350 Vrms (channel to channel and channel to chassis) |
| Digital I/O bits | 8 (one per isolated A/D channel) |
| Digital I/O logic levels | Input: 5/3.3 V levels; Output: 3.3 V levels |
| Overvoltage protection | -40 V to +40 V (power on or off) |
| Power-off leakage current | < 10 μA (-40 V to +40 V) |
| Power consumption | 4.5 W max |
| Operating temperature | -40°C to +85°C (tested) |
| Operating humidity | 95%, non-condensing |
| Vibration | IEC 60068-2-6 and IEC 60068-2-64 |
| Shock | IEC 60068-2-27 |
| MTBF | 290,000 hours |
| Weight | 120 g (4.24 oz) for DNA-AI-218/228-300 |
120 kS/s per channel, with a 480 kS/s maximum aggregate for the entire board.
The DNx-AI-218 supports ±10 V and the DNx-AI-228-300 supports ±300 V.
8 bits, one per isolated A/D channel.
350 Vrms, channel to channel and channel to chassis.