Installation instructions for the DC Blue Digital model. The product has the following features: Emergency overload sensing system. Load sensing system automatically compensates for minor variances in nominal door load. Smoother operation. Digital limit positioning. All settings retained in cases of power interruptions. Selectable auto-close function. Adjustable auto-close time up to 100sec. Manual override for when hand operation is necessary. Safety beam input for safer operation. Suitable for both Tip-up and Sectional overhead type doors. Proven reliability with Magnetic Hall Effect Sensor system. High torque, low rpm motor mounted in a unique C-chassis for quieter operation. Courtesy light activates for 3min whenever the door runs.
DC Blue Digital model is a door automation system for tip-up and sectional overhead doors. This document contains installer instructions covering safety obligations, assembly, mounting, battery installation, wiring, programming, travel limits and overload sensing.
Technical specifications include a 3 m maximum opening height, 10 m2 maximum door size, 220Vac +/-10% 50Hz primary power, 7.2 m/min travel speed and standby consumption under 5W. The system also has selectable auto-close up to 100 seconds and a 24V 10W courtesy light.
| Maximum opening height | 3 m |
|---|---|
| Maximum door size | 10 m2 |
| Primary power supply | 220Vac +/-10% 50Hz |
| Travel speed | 7.2 m/min @ 10kgF when battery is charged |
| Light bulb | 24V 10W bayonet mount |
| Standby power consumption | < 5W |
| Motor | Fixed magnet 24Vdc |
| Maximum run time | 99 sec |
| Load sensing levels | 4 selectable |
| Motor fuse | Fast blow 8A glass 25mm x 5mm located in circuit on board |
| Primary supply fuse | Fast blow 3A glass 25mm x 5mm located inline primary wiring |
| Battery capacity | 3.5 A/hour at 24Vdc |
| Battery reserve duration | Approximately 18 to 24 hours without running the door |
| Battery recharge time | Approximately 10 to 12 hours |
| Auto-close time | Up to 100 sec |
| Courtesy light | Activates for 3 min whenever the door runs |
The maximum door size is 10 m2.
It requires 220Vac +/-10% at 50Hz.
Approximately 10 to 12 hours.
Approximately 18 to 24 hours without running the door.