The DN-280 is a high-performance DJ mixer with the following features: 1. 3-band EQ for precise control over each channel's audio signal. 2. Built-in effects to add extra creativity to your mixes. 3. 2 XLR microphone inputs for connecting microphones or other audio devices. 4. 2 RCA line inputs for connecting CD players or other audio devices. 5. 1 RCA line output for connecting to an amplifier or other audio device. 6. 1 headphone output for connecting headphones for monitoring.
The Denon Professional DN-280 is a compact mixer amplifier designed for installed sound applications. It features a front panel with master volume, bass/treble tone controls, a 3.5 mm auxiliary input, and a combination XLR/1/4" microphone/line input with automatic ducking. The rear panel provides an unbalanced RCA channel input, a Euroblock speaker output for 70V/100V distributed speaker lines, and an IEC power inlet.
The guide includes step-by-step setup instructions for connecting audio sources and speakers using the supplied Euroblock connector, along with a troubleshooting table addressing power, sound, and noise issues. Safety notes emphasize using only 70V/100V speakers with step-down transformers and replacing the fuse with the correct rating.
| Speaker Output Power | < 60 W (without distortion) |
|---|---|
| Ducking Attenuation | 20 dB |
| Ducking Release Time | 2.5 seconds |
| Channel Input | Unbalanced RCA, summed to mono |
| Aux Input | 3.5 mm stereo/TRS |
| Mic/Line Input | XLR or 1/4" (6.35 mm) TRS |
The speaker output delivers less than 60 W without distortion.
No, the channel input is automatically disabled when a device is plugged into the auxiliary input.
A red Protection LED means the unit is in thermal protection mode and will not output sound until it cools down.
When the microphone is active, the auxiliary and channel inputs are attenuated by 20 dB; they return to their set levels 2.5 seconds after microphone activity stops.