Honda Access CRIDER Front Grille Trim Installation Instructions

About this manual

This document is the installation instructions (安装说明书, dated 2015.11) for the Honda Access front grille trim kit for the CRIDER, document number 08F21-T6P-9000-9B. The kit consists of right trim A, trim B, left trim A, right trim C, right trim D, left trim C and left trim D, plus primer (底涂料).

The instructions explain the warning symbols and handling icons, list the required tools (cloth, degreasing detergent, masking tape, calipers), and give step-by-step mounting procedures: cleaning the surface with degreasing detergent, applying primer and letting it dry, aligning each trim piece to the grille shape, temporarily fixing with masking tape and release paper, and pressing the adhesive surfaces firmly. Notes state the surface temperature must be 15–40°C during adhesion and the area must not get wet for 24 hours after installation. This manual is written in Chinese.

What's inside

• 安装位置图 (Installation position diagram)
• 警告标志的说明 (Warning symbol explanation)
• 关于图标 (Icon explanations)
• 一般的注意事项 (General precautions)
• 关于本用品的注意事项 (Precautions for this product)
• 组成配件 (Kit contents)
• 必要工具/用具 (Required tools)
• 脱脂洗洁剂的清洗方法 (Cleaning with degreasing detergent)
• 前格栅饰条的安装 (Installing the front grille trim)

Specifications

Frequently asked questions

What temperature is required when attaching the grille trim?

The surface to be adhered must be between 15 and 40°C; at low temperatures the double-sided tape loses adhesion, so the surface must be heated first.

How soon after installation can the car be washed?

Do not let the installation area get wet, for example by washing the car, within 24 hours after installation.

Can the double-sided tape be peeled off and reattached?

No. Removing and re-sticking the tape can cause damage and prevent the tape and film from adhering fully.

When does applied primer need to be reapplied?

If more than 24 hours have passed after applying the primer, it must be reapplied.