Catalex Serial MP3 Player Module (YX5300) User Manual

This product is an MP3 player module that supports 8k Hz~48k Hz sampling rate MP3 and WAV file formats. It supports TF card and can control MP3 playback status via MCU through UART port.


Catalex Serial MP3 Player Module (YX5300) User Manual - cover page
Brand
Catalex
Category
MP3 Player
Document type
User Manual
Language
English
Pages
10
File format
PDF
File size
548 KB
Published
15 November, 2023
Updated
15 November, 2023
MD5 checksum
D851BCC73488601ED6C8FA713890B987

About this manual

This manual describes the Catalex Serial MP3 Player, a simple MP3 player module based on the high-quality YX5300 MP3 audio chip. It plays MP3 and WAV files with sampling frequencies from 8 kHz to 48 kHz from a micro SD or Micro SDHC card inserted in the on-board TF card socket. An MCU controls playback (song switching, volume, play mode and more) by sending commands to the module over a UART TTL port, and the module can also be debugged via a USB to UART module. It is compatible with Arduino / AVR / ARM / PIC.

The document lists the module's features and specifications, describes the interface (UART control pins, TF card socket, playback indicator, headphone jack and mounting holes), explains the command format with a table of common command bytes, and gives step-by-step usage instructions for testing the module with a USB to UART TTL module and with an Arduino UNO R3 in two example projects. It ends with the part list and a documents download link.

What's inside

  • Description
  • Specification
  • Interface
  • Usage
  • About the commands
  • Use USB to Uart TTL module
  • Use Arduino UNO R3
  • Part List

Specifications

Sampling frequency8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48 kHz
Supported file formatsMP3 / WAV
Power supply3.2 – 5.2 V DC (typical 5 V)
Current consumptionmax 200 mA @ VCC = 5V
Logic interface3.3V / 5V TTL
Supported cardsMicro SD card (<=2G); Micro SDHC card (<=32G)
File system formatFat16 / Fat32
UART baud rate9600 bps
Volume levels30 adjustable classes
Dimensions49 x 24 x 8.5 mm
Net weight5 g

Frequently asked questions

What baud rate does the Serial MP3 Player use for UART control?

The UART TTL serial control uses a baud rate of 9600 bps.

How should the micro SD card be formatted?

The micro SD card must be formatted as FAT16 or FAT32, with songs stored on it; some commands also require folders named "01" and "02" containing files such as 001xxx.mp3.

Which command should be sent first after power up?

After power up you should send the [Select device] command first, "7E FF 06 09 00 00 02 EF", to select the TF card as the storage device.

Which Arduino boards is the module compatible with?

The module is compatible with Arduino UNO / Leonardo / Mega2560 / DUE, and more generally with Arduino / AVR / ARM / PIC.

Download PDF (548 KB)