Stiebel Eltron DCE Trend (DCE 3-1/8/10/15) Electric Tankless Water Heater Operation and Installation Manual

This document is an operation and installation guide for Stiebel Eltron instantaneous electric water heaters.


Stiebel Eltron DCE Trend (DCE 3-1/8/10/15) Electric Tankless Water Heater Operation and Installation Manual - cover page
Brand
STIEBEL ELTRON
Category
Water heater
Document type
User Manual
Language
English
Pages
44
File format
PDF
File size
9.2 MB
Published
11 November, 2023
Updated
11 November, 2023
MD5 checksum
419FDDD388DEA4B24786D91A0C5BDE21

About this manual

This manual covers the operation and installation of the Stiebel Eltron DCE Trend series of electronically controlled electric tankless water heaters, covering the DCE 3-1 Trend, DCE 8 Trend, DCE 10 Trend and DCE 15 Trend models. The water heater is suitable for heating domestic hot water or for reheating preheated water and can supply one or more draw-off points. It is certified to ANSI/UL Std. 499 and conforms to CAN/CSA Std. C22.2 No. 64.

The Operation chapters are intended for both users and qualified contractors and include a quick start guide, safety instructions, recommended settings, cleaning and maintenance, and troubleshooting. The Installation chapters are intended for qualified contractors and cover installation sites, water and electrical connections, commissioning, alternative installation methods, and specifications including dimensions, wiring diagram and data tables. The unit must be installed by a licensed electrician and plumber in compliance with national, state and local plumbing and electric codes.

What's inside

  • Quick Start Guide
  • Safety
  • Water heater description
  • Cleaning, care and maintenance
  • Troubleshooting
  • Installation
  • Commissioning
  • Water heater shutdown
  • Maintenance
  • Specification

Specifications

CertificationCertified to ANSI/UL Std. 499
CertificationConforms to CAN/CSA Std. C22.2 No. 64
Maximum inlet temperature for reheating preheated water131 °F (55 °C)
Power supply disconnectionCircuit breaker disconnecting all poles with at least 1/8˝ (3 mm) contact separation

Frequently asked questions

How do I engage the AE3 safety switch?

Firmly press the white reset button until it clicks and fully locks in place. The water heater is delivered with the safety switch disengaged and will not operate until it is engaged.

What must be done before turning on power to the water heater?

All air must be flushed out of the system by opening and closing all connected draw-off valves at least 5 times for at least 3 minutes total, and the AE3 safety switch must be engaged.

Who is allowed to install the water heater?

The unit must be installed by a licensed electrician and plumber, and the installation must comply with all national, state and local plumbing and electric codes.

Can children use the water heater?

Children aged 3 and older may use it if supervised or instructed on safe use, but children must never play with the water heater or clean it or perform user maintenance unless supervised.

Download PDF (9.2 MB)

More STIEBEL ELTRON Manuals


View all STIEBEL ELTRON manuals →