CMS8H5106 Blood Pressure Monitor Evaluation Board Quick Start Guide introduces the functions and features of CMS8H5106 Blood Pressure Monitor Evaluation Board.
This quick start guide introduces the CMS8H5106 blood pressure monitor solution evaluation board from 中微半导体(深圳)股份有限公司 (www.mcu.com.cn). The board uses the CMS8H5106 SOC, which integrates a 24-bit Sigma-Delta ADC, as its main controller, and the guide is written for the large health-care market. It is a short four-page document, revision 1.00.
The guide gives a product overview with a labeled diagram of the board, then describes each functional module: power supply from 4 AA batteries or a 6 V adapter with an on-board LDO producing 3.3 V, a resistive-bridge pressure sensor driven by a constant current from the SOC's internal op-amp and read through the ADC front-end PGA, an integrated LCD driver with LED backlight driving, motor and valve drive options, and two on-board keys or an external key interface. A revision history closes the document. This manual is written in Chinese.
| Power supply | 4 AA batteries or 6 V power adapter |
|---|---|
| On-board LDO output | 3.3 V |
| ADC | 24-bit Sigma-Delta ADC |
| ADC front end | 22-bit Sigma Delta ADC with PGA amplification |
| Pressure sensor | Resistive bridge network driven by a constant current from the SOC's internal op-amp |
| Display drive | Integrated LCD driver circuit that drives an LCD directly |
| Motor and valve drive | Transistor or dedicated blood pressure driver IC |
| Keys | 2 on-board keys or external keys via key interface |
It is powered by 4 AA batteries or a 6 V power adapter, and an on-board LDO converts the input voltage to 3.3 V for the SOC.
A resistive-bridge pressure sensor is connected to the cuff by a tube; the small differential output of the bridge is amplified by the PGA of the ADC front end and then acquired, and the SOC derives the pressure from the difference-to-pressure function.
It integrates a 24-bit Sigma-Delta ADC, an LCD driver circuit and an internal op-amp used for the sensor's constant-current drive.
Version V1.00, dated February 2021, is the initial version.