The four-post parking lift 4QJY3.0-D is a double-post four-post parking lift with a rated lifting capacity of 10,000 pounds. The lift uses a manual hydraulic system for easy and convenient operation.
This manual covers the Goliath 4QJY3.0-D four-post parking lift, including safety instructions, main parts, parameters, installation, operation, pre-use checks, packing, transport, storage, troubleshooting, the hydraulic diagram, and the spare parts list.
It states the lift is for parking cars weighing less than 4000 kg and describes installation requirements such as a solid level concrete floor, minimum thickness, concrete strength, slope limit, and clearance for safety linkage rods.
| Total height | 2329 mm |
|---|---|
| Lifting/dropping time | approximately 50 s |
| Maximum lifting height | 2080 mm |
| Overall length | 5699 mm |
| Rated load | 3000 kg |
| Rated load | 4500 kg / 10,000 lb |
| Motor power | 2.2 kW |
| Working voltage | 3-400 V+N+PE; 1-230 V+N+PE |
| Noise level | ≤70 dB(A) |
| Oil pressure | 20 MPa |
| Minimum concrete floor thickness | 180 mm |
| Concrete strength | 3500 psi |
| Maximum floor slope | 2 degrees |
| Clearance for safety linkage rods | 1524 mm |
It is used to park cars whose weight is less than 4000 kg.
It must be installed on a solid level concrete floor with no more than 2 degrees of slope.
It should not be installed outdoors unless special consideration protects the power unit from weather, because the power unit is not waterproof.
The maximum lifting height is 2080 mm.