The CX-7008 is a multifunctional door access controller that supports multiple door opening methods, including cards, passwords, cards + passwords, etc.
The SEG CX-7008 Access Controller User Manual explains the installation and operation of the controller. It covers technical characteristics, front LED and sound indications, programming mode, changing the factory password, PIN numbers, user registration with cards or card plus PIN, operation modes and deleting users.
The manual also describes relay activation time, master card registration and deletion, cancelling master cards, restoring factory defaults, resetting the programming password and the connection diagram. Product warranty information is included at the end. This manual is written in Spanish.
| Power Supply | 12 VDC +-10% |
|---|---|
| Consumption | 100 mA |
| Weight | 110 g |
| Operating Temperature | 0ºC - 60ºC |
| Relative Humidity | 20% - 90% |
| User Capacity | 1000 |
| Dimensions | 120 mm x 70 mm x 22 mm (AxLxP) |
| Default Password | 123456 |
| Operating Frequency | 125 kHz |
| Opening Mode | Card or password |
Press (#), enter the factory password 123456 and press (#); the LED turns red.
The default password is 123456.
Disconnect power from the controller, place the RST jumper in position 2-3, connect the controller, then power it off and return the jumper to position 1-2.
The MAC master card adds user cards and the MDC master card deletes user cards; master cards cannot change other settings.