Hypex FusionAmp is a power amplifier that can be used as the basis of a powerful active subwoofer, a two-way or a three-way monitor. The FusionAmp family consists of the following models: FusionAmp One-Way models: FA251, 1x250W FA501, 1x500W FusionAmp Two-Way models: FA122, 2x125W FA252, 2x250W FA502, 2x500W FusionAmp Three-Way models: FA123, 2x125W + 100W Tweeter FA253, 2x250W + 100W Tweeter FA503, 2x500W + 100W Tweeter
The Hypex FusionAmp is a plate amplifier powered by the company's NCORE technology that can be the basis of an active subwoofer, a two-way or a three-way monitor. This user guide covers the one-way models FA251 (1x250W) and FA501 (1x500W), the two-way models FA122, FA252 and FA502, and the three-way models FA123, FA253 and FA503, together with safety precautions, included and optional accessories, connections, installation and troubleshooting.
Because the DSP does not contain a filter out of the box, a filter must be configured and uploaded with the Hypex Filter Design (HFD) software before the FusionAmp produces an output signal. The guide also describes optional items ordered separately, such as the FusionAmp IR Receiver Kit, the Hypex Remote, mounting screws, USB and mains cables, and covers system information, FAQs, support and warranty.
| One-way models | FA251, 1x250W; FA501, 1x500W |
|---|---|
| Two-way models | FA122, 2x125W; FA252, 2x250W; FA502, 2x500W |
| Three-way models | FA123, 2x125W + 100W Tweeter; FA253, 2x250W + 100W Tweeter; FA503, 2x500W + 100W Tweeter |
| Speaker connection terminal block (one-way models) | 4 way, pluggable terminal block, 5.08 mm |
| Mounting screws | 8 or 10 screws required; set contains 10 self-tapping, black, Phillips head screws, 4.3x25.4 mm |
| FusionAmp IR Receiver Kit cable length | 125 cm |
| Mains construction | Class-I, must be connected to a mains socket with protective earthing |
No. The DSP does not contain a filter by default, so a filter must be configured and uploaded using Hypex Filter Design (HFD) software before the module will produce an output signal.
The FusionAmp, this user guide and speaker connection cable(s); for one-way models a 4 way, pluggable terminal block of 5.08 mm is supplied.
Disconnect the unit from the mains and allow all capacitors to discharge for 10 minutes before handling it.
In addition to the analogue inputs, the one-way models have a high level analogue input, whereas the multi-way models have digital inputs instead.
The FusionAmp must be mounted into the speaker cabinet with 8 or 10 screws; the mounting screw set contains 10 self-tapping, black, Phillips head screws.