Metz mecablitz 64 AF-1 digital Flash Unit Operating Instructions

The Metz 64 AF-1 Digital is a flash unit for Pentax digital cameras. It features:


Metz mecablitz 64 AF-1 digital Flash Unit Operating Instructions - cover page
Brand
Metz
Category
Other Electronics
Document type
User Manual
Language
German
Pages
326
File format
PDF
File size
1.6 MB
Published
06 November, 2023
Updated
06 November, 2023
MD5 checksum
0112BA9CA793477DAE210676067DFCF1

About this manual

The Metz mecablitz 64 AF-1 digital is a flash unit intended for digital Pentax cameras with P TTL flash control; the manual states that it is not suitable for cameras from other manufacturers. The instructions cover dedicated flash functions, preparation and power supply, displays, flash modes, wireless remote operation, the OPTION menu, flash techniques and synchronization, touch-display settings, maintenance and troubleshooting.

The extracted text describes mounting the unit on the camera accessory shoe and powering it with four NiMH, alkaline or lithium AA batteries or an optional Power Pack. It also gives safety instructions, including a pause of at least three minutes after every 20 full-power flashes. This manual is written in German.

What's inside

  • Safety Instructions
  • Dedicated Flash Functions
  • Preparing the Flash Unit
  • Power Supply
  • Flash Modes
  • Wireless Remote Operation
  • OPTION Menu
  • Flash Techniques
  • Flash Synchronization
  • Maintenance and Care

Specifications

Compatible camerasDigital Pentax cameras with P TTL flash control
Power source (NiMH)4 NiMH 1.2 V IEC HR6 (AA/Mignon) batteries
Power source (alkaline)4 alkaline-manganese 1.5 V IEC LR6 (AA/Mignon) batteries
Power source (lithium)4 lithium 1.5 V IEC FR6 (AA/Mignon) batteries
Optional power sourcePower Pack with connection cable (optional accessory)

Frequently asked questions

Which cameras is the flash unit not suitable for?

It is not suitable for cameras from other manufacturers; it is intended for digital Pentax cameras with P TTL flash control.

What batteries can the flash unit use?

It can use four NiMH, alkaline or lithium AA batteries; an optional Power Pack is also listed.

How is the flash unit mounted on the camera?

With the camera and flash unit switched off, slide the flash unit into the camera accessory shoe and tighten the knurled nut.

What pause is required during series flash shots at full power?

After every 20 full-power flashes, a pause of at least 3 minutes should be observed.

Download PDF (1.6 MB)

More Metz Manuals


View all Metz manuals →