PPM htV Formaldehyde Detector Operation Manual

htV Formaldehyde Detector Operation Manual, introduces the instrument's usage method, including acceptance, general description, operating principle, interference, sampling, sensor recovery period, calibration and adjustment, other characteristics, temperature and humidity reading, data reading, maintenance, fault, accessories, warranty, etc.


PPM htV Formaldehyde Detector Operation Manual - cover page
Brand
PPM
Category
Monitoring Equipment
Document type
User Manual
Language
Chinese
Pages
13
File format
PDF
File size
400 KB
Published
03 November, 2023
Updated
03 November, 2023
MD5 checksum
8E3E73ED0C3D8B4B6CE634D88F1D960A

About this manual

The PPM htV is a handheld three-parameter indoor air quality instrument for rapidly measuring formaldehyde in air; it can also measure temperature and humidity. It displays readings in ppm and mg/m3, uses an electrochemical formaldehyde sensor, includes humidity compensation and data analysis, and is powered by batteries for portable use.

The manual covers acceptance, operating principle and interferences, sampling and sensor recovery, calibration with the supplied standard tube, temperature/humidity readings, battery maintenance, troubleshooting, accessories, and warranty. It notes that the most accurate measurement range is 10–30°C, readings stabilize after about 60 seconds, and phenolic/resorcinol interference can be removed with the supplied filter tube. This manual is written in Chinese.

What's inside

  • Introduction
  • Technical Information
  • Operation
  • Calibration and Adjustment
  • Other Features
  • Maintenance
  • Troubleshooting
  • Accessories
  • Warranty

Specifications

Measurement parametersFormaldehyde, temperature, and humidity
Display unitsppm and mg/m3
Display resolution0.01 ppm
Sensor typeElectrochemical formaldehyde sensor
Most accurate measurement range10–30°C
Reading stabilization timeAbout 60 seconds
Auto power off5 minutes
Serial interfacePPM AMS-2 or SP-1
Power sourceBattery

Frequently asked questions

What does the PPM htV measure?

It measures formaldehyde in air and can also measure temperature and humidity.

How long does the reading take to stabilize?

The display flashes and increments, then after 60 seconds it settles to a non-flashing value that remains until the instrument is turned off.

How can I reduce phenolic interference?

Install the supplied phenolic filter tube at the instrument’s sampling inlet; it removes phenolic gases from the sample.

When is recalibration needed after a calibration check?

If the reading is within 10% of the value in the standard tube’s temperature/concentration table, recalibration is not needed; otherwise recalibrate following section 4.4.

Download PDF (400 KB)

More PPM Manuals


View all PPM manuals →