Proceq SilverSchmidt ST/N/L Concrete Rebound Hammer Instruction Manual

SilverSchmidt is a rebound hammer for measuring concrete compressive strength. It can be used with Hammerlink software to manage and analyze measurement results.


Proceq SilverSchmidt ST/N/L Concrete Rebound Hammer Instruction Manual - cover page
Brand
Proceq
Category
Other
Document type
User Manual
Language
Chinese
Pages
32
File format
PDF
File size
2.2 MB
Published
03 November, 2023
Updated
03 November, 2023
MD5 checksum
4D57419E58804873749874F466D72E13

About this manual

This Chinese-language instruction manual covers the Proceq SilverSchmidt concrete rebound hammer and Hammerlink software. It begins with safety and responsibility, then explains the instrument's parts, display and user interface, and how to use the rebound hammer correctly.

It describes optional settings for units, statistics, conversion curves, shape factor and carbonation correction, and applications such as uniformity assessment and estimating in-situ compressive strength. Later sections cover operating modes, ordering information, technical specifications, maintenance and support, and using Hammerlink to view data, adjust settings, export data and create custom statistics and curves. This manual is written in Chinese.

What's inside

  • Safety and Responsibility
  • Getting Started
  • Optional Settings
  • Applications
  • Operating the Instrument
  • Ordering Information
  • Technical Specifications
  • Maintenance and Support
  • Starting Hammerlink

Specifications

Impact energy, N type2.207 Nm (1.63 lbf)
Impact energy, L type0.735 Nm (0.54 lbf)
Concrete compressive strength range, N/L type10 – 100 MPa (1450 – 14500 psi)
Concrete compressive strength range, L type with mushroom impact bar5 – 30 MPa (725 – 4351 psi)
Housing dimensions55 x 55 x 255mm (2.16” x 2.16” x 9.84”)
Weight570 g (1.3 lb)
Maximum impacts per sequence99
Display17 x 71 pixels, graphical
Battery lifeMore than 5000 impacts per charge
ChargerUSB type B (5V, 100 mA)
Operating temperature0 to 50°C (32 to 122°F)
Storage temperature-10 to 70°C (14 to 158°F)
IP ratingIP54

Frequently asked questions

Which standards does the SilverSchmidt comply with?

The manual states that the SilverSchmidt fully complies with EN 12504-2 and EN 13791, and that it uses ASTM C805 and JGJ/T 23-2011 to measure rebound number.

How long does charging the SilverSchmidt take?

A full charge takes about 90 minutes.

What is the L model used for?

The L model has low impact energy and is intended for low-strength objects or structures less than 100 mm thick.

How many custom curves can be stored on the SilverSchmidt?

Up to 3 custom curves can be stored at a time; curve positions C1, C2 or C3 are selected for upload.

Download PDF (2.2 MB)

More Proceq Manuals


View all Proceq manuals →