This User's Guide provides installation and programming instructions for the TOTAL CONTROL TM irrigation system controller.
This manual provides installation and programming instructions for Total Control indoor and outdoor irrigation system controllers. It details key features such as four independent programs, water budgeting, rain delay, and battery backup capabilities. The guide explains how to set the time and date, configure watering schedules, and manage station run times.
| Independent Programs | Four fully independent programs |
|---|---|
| Calendar | 365-day calendar |
| Start Times | Sixteen total start times |
| Station Watering Time | 0 minutes to 10 hours |
| Memory Retention | Up to 30 years without power |
| Battery Backup Duration | Over 2000 continuous hours |
| Water Budgeting | 0 to 200% in 10% increments |
| Rain Delay | Programmable to 7 days |
| Maximum Output | 24 V a.c. at 1.25 amps |
A 9-volt alkaline battery maintains the correct time and date during power failures up to 90 days, or over 2000 continuous hours of duty.
The controller automatically turns off the affected station(s), displays 'SHORT', and continues watering other stations until the issue is repaired.
Place the SENSOR switch in the Bypass position to disregard rain switch input and enable controller operation.
Yes, but the SENSOR switch must be in the BYPASS position; otherwise, the controller will not operate automatically or manually.