This manual introduces the operation of Swift KA optical fiber fusion splicer
This user manual covers the Swift K-A optical fiber arc fusion splicer manufactured by UCLSWIFT Co., Ltd. It provides safety instructions, general specifications, product description, and step-by-step operating procedures for splicing single optical fibers, including power supply, fiber cleaning and stripping, cleaving, splicing, and sleeve heating.
The manual also explains maintenance of splice quality, menu configuration, error messages, troubleshooting for splicing problems, and warranty and service information. It is intended to ensure safe and proper operation of the device in both indoor and outdoor environments.
| Fiber Count | Single Fiber |
|---|---|
| Applicable Fibers | SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), SM(G.657 A1, A2/B1, B2), SM(G.654E) |
| Coating diameter | 250μm-1mm |
| Fiber Cleave Length | 250μm: 4-16mm, 900μm: 6-16mm |
| Splice mode | 100 |
| Heat mode | 20 |
| Strip mode | 8 |
| Typical splicing time | 9 sec (Quick Mode) |
| Splice Loss Estimate | SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB |
| Return Loss | >60dB (Typical) |
| Sleeve Heating Time | 30 sec (IS-10 Sleeve, IS-10 mode), 20 sec (IS-15 Sleeve, IS-15 mode) |
| Storage of Splice Result | last 100,000 results (Image 10,000 results) |
| Viewing method | Two CMOS cameras and 5.0-inch color LCD monitor with Electrostatic touch screen |
| Dimensions | 170(W) x 173(L) x 150(H)mm (Excluding bumper) |
| Fiber view and Magnification | X/Y: 410X, Max 820X |
| Weight | 2.85kg (Including battery) |
| Terminals | USB, External Power (DC 12V available for car cigar jack) |
| Electrode Life | Up to 5,000 splices |
| Cleaver | CF-10FT |
| Battery life | Typical 200 cycles (2,500mAh) |
| Storage Conditions | Temperature: -10℃~60℃, Humidity: 0~95%, Altitude: 0~5,000m above sea level |
| Operating Condition | Temperature: -10℃~40℃, Humidity: 0~95%, Wind: 15m/s |
You cannot cancel the heating process by pressing the HEAT button once; press it one more time to cancel.
Increase the duration of heating time and refer to the Heat Menu for more information.
Refer to the Lock Menu for instructions on locking these modes.
The internal standard discharge amount is calibrated, so the discharge amount of each splice mode does not change.