T510 is a wood moisture meter from TROTEC. It features a high-precision sensor and can quickly and accurately measure the moisture content of wood. This manual provides detailed instructions on how to use the device, safety precautions, maintenance and repair, etc.
This is the English operating manual for the Trotec T510, a material moisture measuring device that determines the moisture content of wood and other soft building materials such as gypsum and plaster using the resistance measuring method. The device offers separate measuring modes for wood moisture and building moisture and is operated through a capacitive touchscreen control panel with a cross control. Measured values can be transferred to a computer over the USB interface and analysed with the optional MultiMeasure Studio software.
The manual explains the symbols and safety notes, intended use and personnel qualifications, the device and display elements, transport and storage, installing the measuring tips, inserting the batteries and switching on. It then describes how to perform the wood moisture and building moisture measurements, the key lock, the table of wood types, the measuring principle, the PC software, maintenance and repair, errors and faults, and disposal. Technical data, the scope of delivery and a list of display designations are included.
| Wood moisture measuring range | 0.0 to 100.0 M% |
|---|---|
| Wood moisture accuracy | 0 to 5 M%: ±0.8 M%; 5 to 30 M%: ±0.2 M%; 30 to 100 M%: ±0.1 M% |
| Material moisture measuring range | 0 to 100 digits |
| Material moisture resolution | 0.1 digits |
| Penetration depth (coupling) | approx. 10 mm |
| Measuring method | Resistance measuring method |
| Display | LCD |
| Interface | USB |
| Operating conditions | 0 °C to 50 °C with < 90 % RH (non-condensing) |
| Storage conditions | -20 to 60 °C at < 90 % RH (non-condensing) |
| Power supply | 4 x 1.5 V AA batteries |
| Weight | approx. 280 g |
| Dimensions (L x W x H) | 187 mm x 63 mm x 35 mm |
It is used to measure the moisture content of wood and other soft building materials such as gypsum and plaster, using the resistance measurement method.
The device is powered by four 1.5 V AA batteries; four batteries are included in the scope of delivery.
Briefly press the On/Off key during operation; a short beep sounds and LoC on appears on the display. Press the key again to release the lock.
The device can be connected to a computer with the included USB cable, and the results can be extracted and analysed with the optional MultiMeasure Studio software.