This document is the user manual for AutoAnchor 710-6, which mainly introduces the composition, installation, setup, operation, maintenance and other content of the product for users' reference
The AutoAnchor 710-6 Owner’s Manual covers the AA710 remote console and AA702 base station. It begins with important information, then covers installation, set up, operation, maintenance and troubleshooting, and includes technical specifications and radio frequency compliance details.
Installation instructions describe fitting the magnet and sensor, using the plug-and-play sensor cable, reed switch sensors and sensor tuning. The manual states that the AA710 should only be installed by a qualified marine electrician and that a failure of the wireless link will result in loss of control of the equipment via the AA710.
| Power supply | Remote console: 2 x AA 1.5V batteries; base station: 12V/24V DC |
|---|---|
| Maximum voltage | 30V DC |
| Output maximum current draw | 12V DC: 3.5A; 24V DC: 3.5A |
| IP rating | IP67 for remote console and base station |
| Operating temperature range | 23 oF to 140oF (-5oC to 60oC) |
| Wireless transmission | 2.4GHz ISM Band, IEEE 802.15.4 Compliant, 64 Bit Unique ID |
| Wireless range | Typical minimum 10m (30ft); range depends on installation |
| System support | Supports up to 3 base stations and 3 consoles |
| Rode - rope and chain | Must have a minimum of 10ft (3m) of chain |
The AA710 remote console uses 2 x AA 1.5V batteries.
The typical minimum wireless range is 10m (30ft), and the range depends on installation.
The gap must be a minimum of 3mm and a maximum of 5mm.
The reed switch sensor should be replaced with the AA grey sensor (#9067).